Completely Fanless Design with Aluminum case Ultra High Brightness up to 7" ruggedized monitor designed for stabilizer use 3200nits LCD with Glass protection and AR coating compliant Automatic brightness adjustment with embedded light sensor

Thanks to the possibility to apply logs to Rec 709 conversion LUTs, including Log-C, C-log,
S-log2, S-log3, V-log, J-log1, RedLogFilm, is it possible to import your own
3DLUTs via USB stick, for a complete control over the image LUTs on board Clearly visible under Sunlight Equipped with a 7" Ultra Hyper Bright LCD panel with an outstanding brightness
of up to 3200 nits and a native resolution of 1920 x 1200 with a contrast ratio of 1200:1
OnScreen TALLY The presence of dedicated 3 pin push-pull connector,
gives to the user the possibility to visualize directly on-screen the TALLY signal
with two dedicated and separated channels (RED / GREEN)

3G-SDI Full Support 1x up to 3G-SDI input (SMPTE 425A / SMTPE 425B)
1x Buffered Video Output
Data Ports 1x XTPort for XTBus communication
1x USB port for LUTs uploads
1x Tally port
Power Options 1x 2poles Push-Pull connector with a voltage range from 9V to 34V
1x 2poles Push-Pull connector as power out
1x 4poles Push-Pull connector as XTPort for power and data inputs
1x Vlock or ThreeStuds Battery plate (optional)

One communication protocol to rule them all Motors Sensors Gauges Batteries Drives Monitors ... and much more XTBus offer endless possibilities to interconnect current and future products in a smart way

All the "nits" you need... when and if you need them 3200nits of maximum brightness could be too much for indoor shootings but definitely a must for outdoor ones... ... but how to deal on mixed environment? The answer is the
Adaptive Backlight Management
thanks to a dedicated and integrated
light sensor NOTE: A.B.M. can be assigned to every button (F8 in the video example). Once enabled, the backlight is adaptively adjusted to match the amount of ambient light

But you will never know when it will
during a shot... “ Can't rain all the time ” cit. The Crow (2014) ... for this reason we designed SM7 PRO 3G
to be able to manage sudden water drops
with dedicated "paths"
It is what we call
Water Managed System NOTE: The water path take advantage of the gravity to let water flow outside the monitor via tiny slots on bottom of the case. This can happen only if the monitor is in upright position.

Built from scratch .... under every aspect From PCB design up to aluminum case milled from solid aluminum, passing by software and firmware
SM7 PRO 3G is definitely "made by SmartSystem"

Dimensions
DC Voltage Range
9VDC - 34VDC Additional Technical Specifications
Weight
1.3kg / 2.7lbs Power Consumption
<= 25W Working Temperature
-20°C～+40°C Working humidity
10%～80%