• Adjustable Counterweight for Steadicam® Volt®

    £ 99.95
    SKU: 000009738
    EAN: 8051411192824

    it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle. This effectively helps you to perfectly balance and recenter the M2 gimbal after the installation of Volt® motors taking into account the extra movement of the motor assembly depending by the tension applied on the motor belts or other imbalances.In the bundle:
    • 1x Adjustable Counterweight with locking screw
    • 1x Hex key #4
  • ArmX1 Drop Down Kit

    £ 199.95
    SKU: 000008834
    EAN: 8051411192602

    Going down to the floor has never been easier.Compatible with all ArmX1 ever manufactured, it can let you mount the J-Bracket or U-Bracket (regular or upside-down) lower than 254mm / 10", respect standard ArmPost.Manufactured in Ergal aluminum with stainless steel tube and with push pins for extra safety
  • Hard Mount with Mitchell and Tube attachment

    £ 999.95
    SKU: 000007111
    EAN: 8051411191469

    Ultra rigid Hard mount compatible with every stabilizer arm based on the industry standard mating block.The core plate has the possibility to mount the female mating block for regular or goofy operation simply swapping the position of the mating block,.The main assembly can be mounted securely and natively to a Mitchell Plate or, thanks to modified Half Clamp with a Safety Working Load (SWL) of 750kg / 1650 lbs, to any pipe with a diameter between 48mm/1.89" up to 51mm/2.01".In the box:
    • Hard Mount Core with 1x Female mating block
    • Michell plate
    • Half clamp for 48-51 / 1.89-2.01" pipes with SWL of 750kg/1650lbs
    • Resin case
    Note: Considering the increasing difficulty in finding worldwide the original Doughty Clamp T57121, our HardMount "could" be equipped with an equivalent Half Clamp that guarantees the same SWL. Since both these products are third parties, they can be superficially scratched even before being delivered to the SmartSystem. Even if we try to guarantee the best not only technical but also aesthetic, this problem is beyond our control. At the same time, we can guarantee that any aesthetic scratches will not affect the functions and mechanical capabilities of the clamp
  • J-Bracket for 5/8″ post

    £ 159.95
    SKU: 000007112
    EAN: 8051411191476

    J-Bracket with 5/8" hole compatible with- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - Tiffen steadicam® arms with 5/8 arm postThe J bracket come with a 5/8 arm post and with a locking pin compatible with- SmartSystem Matrix Sleds (with new handle) - Betz® Tool Rig® sled
  • Placeholder

    J-Bracket for 5/8″ post designed for GPI PRO Sled

    £ 159.95
    SKU: 000008802
    EAN: 8051411192497

    J-Bracket with 5/8" arm post designed for GPI® PRO Sled- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - Tiffen steadicam® arms with 5/8 arm postThe J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- GPI® PRO Sled
  • J-Bracket for 5/8″ post designed for steadicam M1

    £ 159.95
    SKU: 000008791
    EAN: 8051411192466

    J-Bracket with 5/8" arm post designed for steadicam® M1 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - Tiffen steadicam® arms with 5/8 arm postThe J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- steadicam® M1 gimbal
  • J-Bracket for 5/8″ post designed for steadicam M2

    £ 159.95
    SKU: 000008504
    EAN: 8051411192223

    J-Bracket with 5/8" arm post designed for steadicam® M2 Gimbal- SmartSystem Arm X1 - PRO® GPI® Titan® and Atlas® Arms - FlowCine® XArm® - Tiffen steadicam® arms with 5/8 arm postThe J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- steadicam® M2 gimbal
  • Matrix M8 d.15 Threaded Rods bracket / 60mm

    £ 79.95
    SKU: 000008715
    EAN: 8051411192404

    Additional bracket for Matrix Sled for a safe and decoupled connection for low mode monitor.Compatible only with M8 d.15 threaded carbon fiber rods.Distance Center-to-Center = 60mmNOTE: no rods are included in this package
  • Matrix Sled Docking Ring

    £ 69.95
    SKU: 000008476
    EAN: 8051411192411

    Docking rings for Matrix sled compatible with Matrix Sled Docking Bracket onlyIn the box:
    • 2x Half-Docking ring
    • 2x M4 screws
     
  • Matrix Sled to Volt® Bracket

    £ 79.95
    SKU: 000009053
    EAN: 8051411192596

    Bracket specifically design to grant a stable and vibration-free connection between Volt® Brain and Matrix top stageIn the bundle:
    • 1x Volt® Bracket
    • 2x M8 screws for connection to Matrix Topstage
    • 4x 8/32" x 1/2" screws for Volt® connection
  • Matrix Stabilizer Screws kit

    £ 29.95
    SKU: 000007596
    EAN: 8051411191698

    Kit of screws for Matrix Sled dovetail made in premium stainless steelIn the kit:
    • 2x 1/4" screws
    • 2x 3/8" screws
  • Matrix Standard Rods Bracket

    £ 69.95
    SKU: 000002388
    EAN: 8051411191681

    Standard Rods Bracket for Matrix Sled.Designed for Carbon rods with a diameter of 15mm.Center-to-center distance : 100mm
  • Sled to Tripod Adapter

    £ 289.95
    SKU: 000008468
    EAN: 8051411192206

    Designed for and easy and quick camera swap from Matrix Sled to a tripodThe adapter can be fixed on a tripod head via 1/4" or 3/8" screws.Hard anodized for durability
  • Placeholder

    SM7-PRO-3G Cage

    £ 99.95
    SKU: 000010006
    EAN: 8051411192992

    With this simple cage, specifically desgned for SM7 PRO 3G, it is possible to mount it on brackets that require central attachment under the monitor.Milled from Solid Aluminum, shot peened and hard anodized.
  • SmartHEAD M8 d.15mm Threaded Rod

    £ 39.95
    SKU: 000006860
    EAN: 8051411192398

    15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracketNOTE : This product is composed by 1 single rod.
  • U-Bracket for 5/8″ post

    £ 149.95
    SKU: 000008011
    EAN: 8051411191735

    U-Bracket for Matrix Sled. Especially designed for Matrix R2 Lite in "Ronity" configuration. It let you increase the distance from the ArmX1 arm post and the Matrix Sled handle giving to you more headroom to install your preferred monitor on this last one.
  • Placeholder

    U-Bracket for 5/8″ post designed for GPI PRO Sled

    £ 159.95
    SKU: 000008804
    EAN: 805141119251

    U-Bracket designed to be compatible with GPI® PRO Sled gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one.The J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- GPI® PRO Sled Gimbal
  • Placeholder

    U-Bracket for 5/8″ post designed for steadicam M1

    £ 159.95
    SKU: 000008803
    EAN: 8051411192503

    U-Bracket designed to be compatible with steadicam® M1 gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one.The J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- steadicam® M1 gimbal
  • Placeholder

    U-Bracket for 5/8″ post designed for steadicam M2

    £ 159.95
    SKU: 000008505
    EAN: 8051411192237

    U-Bracket designed to be compatible with steadicam® M2 gimbalIt let you increase the distance from the arm post and the Sled handle giving to you more headroom to install your preferred monitor on this last one.The J bracket come with a 5/8 arm post and with a locking pin compatible ONLY with- steadicam® M2 gimbal