Shop – SmartSystem | Innovative Solutions for Filmmakers

1/4” Photographic Screws
€ 23.53
SKU: 000003699
EAN: 8051411190653

Ensure a stable fixing of your equipment with high quality inox steel screws
- Cinema design
- Compatible with major plates on the market. Cartoni, Sachtler, Manfrotto, etc...
- 100% Made in Italy. No import from asian markets
- High quality inox steel
- Kit composed by 10 screws
Add to cart
15mm Carbon Fiber Rod with end joint for Matrix sled
€ 99.16
SKU: 000008374
EAN: 8051411192473

15mm carbon fiber rod with embedded battery joint designed for Matrix sleds.In the kit:
- 1x 15mm carbon fiber rod with embedded battery joint
- 1x Locking knob
- 1x Nylon washer
Add to cart
3Studs Plate for SM7-PRO-3G
€ 275.82
SKU: 000009980
EAN: 8051411192978

3Studs plate addon kit for SmartSystem monitor:
- SM7-PRO-3G
It includes a jumper cable from DTAP to monitor
Add to cart
5/8” to 1/4” Stand Adapter
€ 50.88
SKU: 000003635
EAN: 805141190592

It allows you to fix your slider to standard 5/8" light standsWorks with every slider on the market with a 1/4" threaded hole.Fully milled from solid AISI Inox Steel
Add to cart
Adjustable Counterweight for Steadicam® Volt®
€ 120.33
SKU: 000009738
EAN: 8051411192824

it matches perfectly the weight of the standard counterweight with the ability to precisely tuning the position of the outer bell increasing the momentum on the gimbal handle. This effectively helps you to perfectly balance and recenter the M2 gimbal after the installation of Volt® motors taking into account the extra movement of the motor assembly depending by the tension applied on the motor belts or other imbalances.In the bundle:
- 1x Adjustable Counterweight with locking screw
- 1x Hex key #4
Add to cart
AirBRIDGE
€ 198.38
SKU: 000004012
EAN: 8051411190851

Add WiFi connectivity to your DigiDRIVE Portable Plase note : AirBRIDGE is not necessary for DigiDRIVE Portable MK2 since DigiDRIVE Portable MK2 has its own WiFi connectivity.
Add to cart
Arm Post 1/2in – Stick Out 140mm / 5.5in
€ 151.19
SKU: 000009207
EAN: 8051411192770

ArmX1 arm post with 1/2" diameter and stickout of 140mm / 5.5"
Add to cart
Arm Post 1/2in – Stick Out 40mm / 1.5in
€ 125.78
SKU: 000008609
EAN: 8051411192329

ArmX1 arm post with 1/2" diameter and stickout of 40mm / 1.5"
Add to cart
Arm Post 3/4in – Stick Out 140mm / 5.5in
€ 151.19
Add to cart
Arm Post 3/4in – Stick Out 190mm / 7.5in
€ 160.87
Add to cart
Arm Post 3/4in – Stick Out 40mm / 1.5in
€ 125.78
Add to cart
Arm Post 3/4in – Stick Out 90mm / 3.5in
€ 137.88
Add to cart
Arm Post 5/8in – Stick Out 140mm / 5.5in
€ 110.65
Add to cart
Arm Post 5/8in – Stick Out 190mm / 7.5in
€ 125.78
Add to cart
Arm Post 5/8in – Stick Out 40mm / 1.5in
€ 90.69
Add to cart
Arm Post 5/8in – Stick Out 90mm / 3.5in
€ 101.22
Add to cart
Arms Hard Case
€ 349.63
SKU: 000006526
EAN: 8051411191230
- Polypropylene outer case
- Shaped Foam rubber inner padding
- Transport handle
- Automatic pressure release valve
- Outer dimensions : 850 x 440 x H158 mm / 33.46 x 17.32 x H6.22 inch
- Operating temperature : -30 / 90°C (-22 / 194°F)
- Weight : 6.5 kg
- IP67 - STANAG 4280 - DEF STAN 81-41 Compliancy)
Add to cart
ArmX1
€ 9,401.64
SKU: 000002418
EAN: 8051411190172
- Double section articulated stabilization arm with an ultimate payload of 34kg (74.9lbs) based on an exclusive Patented Design.
- Extremely light and compact: it’s one of the smallest and lightest stabilizer arm in the market (only 45mm / 1.77″of width)
- Exclusive X-Tune system allows the operator to set up Arm X1 to obtain the correct dynamic response for its needs.
- Completely milled from highest quality Ergal 7075 aluminum, shot peened and hard anodized for ultimate strength and lightness (only 4.5kg / 9.92lbs in its heavier configuration).
- Equipped with Patented DynaSpring Technology that dynamically adapt the answer of the springs all over the boom range
- Perfectly compatible with every type of professional stabilizer Vest or Sled on the market.
IN THE BOX
- 1x ArmX1 equipped with DynaSpring
- 1x Standard 5/8" arm post (click here for additional Arm Posts)
- 1x Standard Stainless Steel mating block
- 4x Blue Breeze Springs
- 4x Obsidian Black Springs
- 1x Resin case with shaped foam
- 1x Allen Key #5 for Spring Preload
- 1x Allen Key #3 for Arm Post friction tuning
Add to cart
ArmX1 Arm Post Locking Knob
€ 18.21
SKU: 000006816
EAN: 8051411192121

Arm Post Locking Knob for ArmX1Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
Add to cart
ArmX1 Cotton T-Shirt

Slim-fit fit - UnisexNon-deformable tubular structure, reinforced seams and elasticated collar. 100% combed ring spun cotton - 145 g / m2. NOTE : Check Height and Width reference picture before ordering
View products

IN THE BOX