• 1/4” Photographic Screws

    € 23.53
    SKU: 000003699
    EAN: 8051411190653

    Ensure a stable fixing of your equipment with high quality inox steel screws
    • Cinema design
    • Compatible with major plates on the market. Cartoni, Sachtler, Manfrotto, etc...
    • 100% Made in Italy. No import from asian markets
    • High quality inox steel
    • Kit composed by 10 screws
    Add to cartDone

  • 15mm Carbon Fiber Rods with end joint for Matrix sled

    € 99.16
    SKU: 000008374
    EAN: 8051411192473

    15mm carbon fiber rod with embedded battery joint designed for Matrix sleds.In the kit:
    • 1x 15mm carbon fiber rods with embedded battery joint
    • 1x Locking knob
    • 1x Nylon washer
    Add to cartDone

  • Arm Post 1/2in – Stick Out 40mm / 1.5in

    € 125.78
    SKU: 000008609
    EAN: 8051411192329

    ArmX1 arm post with 1/2" diameter and stickout of 40mm / 1.5"
    Add to cartDone

  • Arm Post 3/4in – Stick Out 140mm / 5.5in

    € 151.19
    Add to cartDone

  • Arm Post 3/4in – Stick Out 190mm / 7.5in

    € 160.87
    Add to cartDone

  • Arm Post 3/4in – Stick Out 40mm / 1.5in

    € 125.78
    Add to cartDone

  • Arm Post 3/4in – Stick Out 90mm / 3.5in

    € 137.88
    Add to cartDone

  • Arm Post 5/8in – Stick Out 140mm / 5.5in

    € 110.65
    Add to cartDone

  • Arm Post 5/8in – Stick Out 190mm / 7.5in

    € 125.78
    Add to cartDone

  • Arm Post 5/8in – Stick Out 40mm / 1.5in

    € 90.69
    Add to cartDone

  • Arm Post 5/8in – Stick Out 90mm / 3.5in

    € 101.22
    Add to cartDone

  • ArmX1 Arm Post Locking Knob

    € 18.21
    SKU: 000006816
    EAN: 8051411192121

    Arm Post Locking Knob for ArmX1Technical Note : In case of emergency, it can be replaced with a commercial knob with M6 x10 threading
    Add to cartDone

  • ArmX1 Mating Block – 7075 Ergal Aluminum

    € 402.87
    SKU: 000007576
    EAN: 8051411192664

    Standard Mating block, in bundle with every ArmX1,  industry standard compatible.Made in 7075  Ergal aluminum, shot peened and hard anodized.With only 148grams / 0.32lbs, it grants strengths, performance and low weightNOTE : Take a look also to S31803 Duplex Stainless Steel Mating Block for ultimate performance 
    Add to cartDone

  • ArmX1 Mating Block – S31803 Duplex Stainless Steel

    € 751.35
    SKU: 000009306
    EAN: 8051411192671

    Hi performance Mating block industry standard compatible and specifically designed for ArmX1.With 368grams / 0.82 lbs, made with S31803 Duplex stainless steel, it grants ultimate strength and fatigue durability.Respect the Standard ArmX1 mating block made in 7075 Ergal aluminum, the S31803 Duplex version offer:
    • 130% more fatigue strength
    • 30% more ultimate tensile strength
    • 8% more yield tensile strength
    Engineering addicted? Take a look at this engineering comparison between 7075 Ergal and S31803 Steel at this link
    Add to cartDone

  • ArmX1 Rain Cover

    € 159.66
    SKU: 000007890
    EAN: 8051411191674

    The most versatile Rain Cover for your ArmX1.It protects your preferred stabilizing arm from dust, everyday usage as well as thin rain giving to you the possibility to access to every part of ArmX1Completely made in soft waterproof high quality Neoprene 
    Add to cartDone

  • ArmX1 Rain Suit

    € 149.98
    SKU: 000008000
    EAN: 8051411191728

    A fully insulated Rain Suit for ArmX1.Completely made in soft waterproof high quality Neoprene
    Add to cartDone

  • ArmX1 Spin Post Bearing Upgrade Kit

    € 11.43
    SKU: 000009521
    EAN: 8051411192756

    With this kit, it is possible to transform the standard ArmX1 Arm Post into a free-spinning friction-less Arm Post.In the kit:
    • 1x Needle bearing (model AXK 1528)
    • 1x Allen key Hex #3 for spin post tuning
    A comprehensive video on how to tune Arm Post in order to work with AXK 1528 needle bearing can be found under video section on Customer Care Platform of your registered ArmX1.NOTE: Since the shipping cost / product price ratio is high and since this kit use standardized product codes, it is possible to mount on ArmX1 every bearing that matches the AXK 1528 specs.Some useful links where to find AXK 1528
    Add to cartDone

  • C-Battery Counterweight

    € 40.35
    SKU: 000006528
    EAN: 8051411191254

    Counterweight designed to add mass on the bottom of your Matrix Sled if necessary.Every counterweight has a weight of 250gr / 0.5lbs (M4 screw included)Please note that the image is for reference and the color of the counterweight could be different
    Add to cartDone

  • C-Battery ThreeStuds Mount w/ Adapter

    € 366.57
    SKU: 000007895
    EAN: 8051411191636

    C-Battery with ThreeStuds Mount is the necessary accessory for Matrix Sled to grant to you the possibility to mount:
    • additional Battery for more power option (Three Studs battery)
    • counterweights for balancing heavy cameras
    Add to cartDone

  • C-Battery V-Lock Mount w/ Adapter

    € 286.71
    SKU: 000006527
    EAN: 8051411191247

    C-Battery plate is the necessary accessory for Matrix Sled to grant to you the possibility to mount:
    • additional Battery for more power option
    • counterweights for balancing heavy cameras
    This product is in bundle inside these sleds or inside these pre-configured kits:  
    Add to cartDone

  • Extreme to R2 3Studs Upgrade Kit

    € 2,710.34
    SKU: 000008102
    EAN: 8051411192084

    Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one.The kit is composed by:
    • 1x Ronin™2 Plate Adapter for Matrix Sled
    • 1x Ronin™2 Battery holder (tilt-able from +90° to -90° – 100mm distance centre-to-centre of 15mm carbon fiber rods)
    • 1x Ronin™2 Yaw Locker
    • 1x  3Studs Plate with 1/4 and 3/8 threaded holes and Push Pull connectors (fuse protected)
    • 1x SmartCAM Horizon System
    • 1x Ronin™2 battery pack to Matrix Sled cable
    • 1x Matrix Sled to Ronin™2 power cable
    • 1x Battery Plate to Sled connection cable
     Please NOTE : This kit is compatible only with Extreme sled equipped with 3Studs plates
    Add to cartDone

  • Extreme to R2 Lite 3Studs Upgrade Kit

    € 1,827.04
    SKU: 000008105
    EAN: 8051411192107

    Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one.The kit is composed by:
    • 1x Ronin™2 Plate Adapter for Matrix Sled
    • 1x Ronin™2 Battery holder (tilt-able from +90° to -90° – 100mm distance centre-to-centre of 15mm carbon fiber rods)
    • 1x Ronin™2 Yaw Locker
    • 1x  3Studs Plate with 1/4 and 3/8 threaded holes and Push Pull connectors (fuse protected)
    • 1x R2 Counterweight plate to mount up to 10x Counterweights (already in bundle with Extreme sled) to help balancing heaviest setup when used with or without Ronin™2
    • 1x U-Bracket in order to increase the distance of the sled from the arm and giving the possibility to use your preferred monitor on the sled handle
     Please NOTE : This kit is compatible only with Extreme sled equipped with 3Studs plates
    Add to cartDone

  • Extreme to R2 Lite VLock Upgrade Kit

    € 1,742.34
    SKU: 000008104
    EAN: 8051411192091

    Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 Lite one.The kit is composed by:
    • 1x Ronin™2 Plate Adapter for Matrix Sled
    • 1x Ronin™2 Battery holder (tilt-able from +90° to -90° – 100mm distance centre-to-centre of 15mm carbon fiber rods)
    • 1x Ronin™2 Yaw Locker
    • 1x  VLock Plate with 1/4 and 3/8 threaded holes and Push Pull connectors (fuse protected)
    • 1x R2 Counterweight plate to mount up to 10x Counterweights (already in bundle with Extreme sled) to help balancing heaviest setup when used with or without Ronin™2
    • 1x U-Bracket in order to increase the distance of the sled from the arm and giving the possibility to use your preferred monitor on the sled handle
    • 1x Ronin™2 battery pack to Matrix Sled cable
    • 1x Matrix Sled to Ronin™2 power cable
    • 1x Battery Plate to Sled connection cable
     Please NOTE : This kit is compatible only with Extreme sled equipped with VLock plates
    Add to cartDone

  • Extreme to R2 VLock Upgrade Kit

    € 2,625.64
    SKU: 000007352
    EAN: 8051141191544

    Thanks to the modularity of the Matrix Sled, your Extreme Sled can be transformed into a full R2 one.The kit is composed by:
    • 1x Ronin™2 Plate Adapter for Matrix Sled
    • 1x Ronin™2 Battery holder (tilt-able from +90° to -90° – 100mm distance centre-to-centre of 15mm carbon fiber rods)
    • 1x Ronin™2 Yaw Locker
    • 1x  VLock Plate with 1/4 and 3/8 threaded holes and Push Pull connectors (fuse protected)
    • 1x SmartCAM Horizon System
    • 1x Ronin™2 battery pack to Matrix Sled cable
    • 1x Matrix Sled to Ronin™2 power cable
    • 1x Battery Plate to Sled connection cable
     Please NOTE : This kit is compatible only with Extreme sled equipped with VLock plates
    Add to cartDone

  • Intelligent Dual 3Studs Battery Plate 12V/24V

    € 1,379.34
    SKU: 000008058
    EAN: 8051411191872

    Dual battery pack for 3Studs Batteries with integrated electronics for Matrix Sleds able to subdivide power to various appliances like:
    • CAMERA @ 12V
    • CAMERA @ 24V (two batteries required)
    • AUXILIARIES
    For wiring diagram of Matrix Sled or user manual for Intelligent Battery Pack, please refer to the Download section of our website
    Add to cartDone